Oneida Air Systems - The Dust Deputy

What is the Dust Deputy?
The Dust Deputy is an extremely efficient, cyclonic pre-separator for vacuums. It's constructed of heavy-gauge steel and continuously seam-welded. Trap dust in the barrel and NOT in your shop vacuum. The Dust Deputy will filter 99% of sanding dust. Only 1% goes into the vacuum. Extend the life of your shop vacuum and your filters.
Click the image on the left to enlarge, and click the image on the right to view a video of the Dust Deputy in action.
Note: The Dust Deputy is not for use with highly explosive dust. Check all applicable federal, state and local codes.

Video

The Dust Deputy - Tired of using your shop vacuum and getting poor results? Oneida's new patent pending Dust Deputy will transform your shop vacuum and the way you work! Take a look at a brief video that shows the Dust Deputy in action.

What Can I Use The Dust Deputy For?
Editorials and Magazine Reviews

What the Dust Deputy Does For You
1. Increased Suction Power: Most shop vacuums clog up rapidly.With most of the waste getting trapped in the Dust Deputy's drum, the filters stay cleaner and power drop-off is much less.
2. Fine Dust Separation: Most shop vacuums can't capture the finest dust which is the most harmful. By retrofitting the Cleanstream® HEPA filter to your shop vacuum, you can capture 99.97% of the remaining waste down to .3 microns.
3. Longer Life: With less filter loading and true HEPA filtration, you'll get longer filter life.

One Customer's Experience with the Dust Deputy:
"I continue to use the Dust Deputy everyday, and am amazed by its performance. No longer do I feel that I am poisoning myself during restoration work. Bravo! A major problem is solved. Before Deputy, my shop vac filter would plug in 5 minutes. Now, after hours of routine job-site clean-up, there is still enough airflow to suck up a penny, which is my acid test. The Dust Deputy cyclone feels as if it is built of boiler plate - put it in your will for your grandchildren." - LM